Some popular styles are the “T” tunic, medieval, baby doll, and dolman tunic. If you’re a beginner to sewing, choose a sleeveless tunic. That way, you don’t have to worry about sewing perfect sleeves.
While tracing, use push pins to hold the garment in place. Make sure you label each drawing so later on you’ll remember where each piece goes.
Make sure you are standing nice and straight while taking these measurements. If your tunic is going to have sleeves, measure around the fullest part of your upper arm.
If the paper has wrinkling or creases, carefully dry iron the paper on low heat to make it smooth.
Some thin fabrics are more difficult to manipulate and sew. So if you’re a beginner, consider choosing a thicker fabric, such as knit or double gauze. Use your pattern as a guide to picking the right fabric. For example, avoid denim if you want a tunic that drapes or stretches because this material is very heavyweight. Instead, choose knit or silk.
For a knee length tunic, it is recommended to purchase 2. 25 yards (2. 06 m) of fabric. Of course, the amount of yardage will depend on your height and weight. Follow the manufacturer’s instructions on whether or not to wash the fabric before sewing. You’ll need to pre-wash certain fabrics, such as flannel, to prevent shrinkage once your tunic is finished. [7] X Research source
To keep the pattern pieces in place, use sewing pins or pattern weights. These items can be found at a fabric or craft store. Remember to work on a flat surface and to lay down your fabric flat and smooth before laying the pattern on top of it.
There are pros and cons to each type of marking tool. For example, tailor’s chalk is very easy to use, but it can fade very quickly with the slightest touch. Choose the marking tool that you believe will do the best job for your garment.
Make sure your fabric scissors are as sharp as possible. Dull scissors may snag your fabric. Use a rotary cutter for thicker fabrics, such as leather. This tool is not necessary but will make cutting easier.
Use as many needles as you can so the two pieces stay put together.
Do a lapped seam for heavy fabrics like leather or suede. Try a French seam for thin or sheer fabrics. [13] X Research source If you purchased your pattern or found it online, follow the instructions to see if there is a seam allowance. In many cases it’s 5⁄8 inch (1. 6 cm).
Make sure you leave holes for the arms and the bottom. You don’t want to sew those up!
Be careful not to cut off any fabric from your tunic when clipping excess thread.
