For heavier pictures, you’ll want to use a wire installed across the back of the frame. [2] X Expert Source Jason PhillipHandyman Expert Interview. 2 July 2020.
If you don’t have a tape measure, you could also use a yardstick or something similar to get the measurement so that the weight is distributed more evenly.
This isn’t a requirement, but it will make your frame more stable when it’s finally hanging up.
A lot of sawtooth hangers have a mark in the very center to make it easier to line it up on the back of the frame.
Some sawtooth kits come with nails, and some come with screws. Use whatever came with your kit to ensure the hanger is properly attached. If it came with screws, you’ll need to use a screwdriver rather than a hammer. The sawtooth hanger needs to be attached to the frame. Even if there is sturdy canvas paper covering the back of the picture, chances are the hanger will just rip through it once you place the picture up on the wall.
Because your picture is so light, you don’t need to worry about finding a stud to tap in to.
Because the sawtooth hanger is located on the frame, you don’t need to measure down to meet the hook like you would with other types of hanging implements.
Some sawtooth kits come with small hooks that go on the nail. This hook latches into the sawtooth hanger, rather than just hanging the picture from the nail. You could also use a screw driven straight into the wall for the same effect. [10] X Expert Source Jason PhillipHandyman Expert Interview. 2 July 2020.
If you’re having trouble gauging whether or not the picture is straight, use a level to check it. Many smartphones now have “level” apps so you might not even need an additional tool.
Find rubber bumpers online or at your local home improvement store.
