Dremel tools can be used to cut any type of tile!
You can use blue painter’s tape or masking tape to secure the plastic in place.
Follow your Dremel rotary tool’s instruction manual to securely attach the Dremel bit. Always turn off and unplug your Dremel tool before you install a new bit.
Be sure to put on safety goggles and cover your mouth with a dust mask before you start cutting.
You could wear out the bit prematurely if you push too hard. If you accidentally crack a tile, you can repair the crack with a tile repair epoxy kit.
If you are cutting out a circle, you can either try to do the whole cut at once with the #562 bit, or you can cut an “X” in the middle first to cut out smaller sections at a time. When you are done cutting, remove the plastic coverings you put down and wipe up any dust that they didn’t catch.
If the tile you want to cut is not glossy, you could use a pencil to draw the lines instead of a permanent marker. No matter what type of tile you want to cut, a Dremel tool can do the job.
Rubber clamps help protect the tile. If you use a metal vice or clamps, you could easily crack the tile.
Refer to the owner’s manual for your Dremel tool if you are not sure how to attach a bit. You can use a Dremel Saw-Max with the larger SM540 tile cutting blade to make a large number of linear tile cuts more easily. [9] X Research source
Make sure to put on safety goggles and a protective mask for your mouth before you begin.
Don’t push too hard or you could wear out the cutting blade quickly.
If you are cutting a whole end off a tile, then simply push through to the end of the line and let the excess piece fall away. Repair any hairline cracks in tiles with a tile repair epoxy kit if you want to salvage the tile.
